Filter
Top Products
www.gateway.com
43
2 Pull the optical drive release latch out (toward you).
3 Unplug the cables from the optical drive.
4 Return your computer to its upright position, then slide
the optical drive out the front of the computer.
5 Slide the new drive into the computer from the front
until the front of the drive is flush with the front of the
computer, then slide the drive release lever forward
(away from you) to lock the drive into place.
6 Lay the computer face-down, then reconnect the cables
to the drive.
7 Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
8512032.book Page 43 Tuesday, January 9, 2007 1:47 PM