Gateway Profile 6 Personal Computer User Manual


 
CHAPTER 4: Upgrading Your Computer
40
Replacing the power supply
To replace the power supply:
1 Remove the back panel by following the instructions in
“Opening the case” on page 35.
2 Remove the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
3 Unplug the power supply from the system board.
4 Pull the power supply release lever out (toward you)
until the power supply slides freely, then slide the
power supply out of the computer.
5 Slide the new power supply into the power supply bay
until it clicks into place.
6 Plug the new power supply into the system board.
7 Replace the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
8512032.book Page 40 Tuesday, January 9, 2007 1:47 PM