Filter
Top Products
27
Using router settings and features
www.gateway.com
7 In the Access Point section, under Allow Internet access by, click ALL Wireless
stations
or Selected Wireless stations only. If you clicked Selected Wireless
stations only
, click Select Stations.
The computers listed are current DHCP clients or have been added
manually to the PC Database on the
Advanced menu. If a DHCP client is
not listed, restart the computer.
Select the computers you want to have access to your wireless network.
To select multiple computers, hold down the C
TRL key (Mac - SHIFT key)
when you click computer names, or click
Select All or Select None.
8 Click Apply to accept your changes or Cancel to remove your entries and
return to default values, then click
Close to return to the Wireless screen.
9 Click Save to accept your Wireless changes or Cancel to remove your entries
and return to default values.
Changing the password
This screen allows you to change the router password from the default (admin)
setting or from the current setting. You will be prompted for the password each
time you attempt to open the Gateway Wireless Router Setup utility.
To change the password:
1 Click Password in the left column. The Password screen opens.
2 In the New Password field, type the new password (up to 9 alphanumeric
characters).
3 In the Verify Password field, type the same password to confirm your
change.
4 Click Save to accept your Password change or Cancel to remove your entry
and return to the default setting.