Filter
Top Products
GE Energy
10
994-0089–1.00–2, General
• The successful operation of this equipment depends upon proper handling,
installation, and operation. Neglecting fundamental installation requirements may
lead to personal injury as well as damage to electrical equipment or other property.
• All AC voltage and current terminals are protected from accidental contact by a
mechanical safety shield.
• All electronic components within the D400 are susceptible to damage from
electrostatic discharge. Observe standard precautions for handling electronic
components.
• Hazardous voltages can cause shock, burns or death. To prevent exposure to
hazardous voltages, disconnect and lock out all power sources before servicing and
removing components.
• If the D400 is used in a manner not specified in this manual, the protection provided
by the equipment may be impaired.
Warning Symbols
The following table explains the meaning of warning symbols that may appear on the
D400 or in this manual.
Symbol Meaning
The relevant circuit is direct current.
The relevant circuit is alternating current.
!
CAUTION: Refer to the documentation for important operating and
maintenance instructions. Failure to take or avoid a specified action could
result in loss of data or physical damage.
WARNING! Dangerous voltage constituting a risk of electric shock is
present within the unit. Failure to take or avoid a specific action could
result in physical harm to the user.
CAUTION: Class 1M Laser (IEC 60825-1 Safety of laser products)
CAUTION: Hot surface
Earth (Ground) Terminal
Protective Earth Terminal