Filter
Top Products
GE Energy
D400 Substation Data Manager User's Manual 87
Category Standard Name Description
IEC 61000-4-5 Surge immunity test
IEC 61000-4-6
IEC 60255-22-6
Immunity to conducted disturbances,
induced by radio-frequency fields
IEC 60255-22-1 1 MHz burst immunity test
IEC 61000-4-8 Power frequency magnetic field
immunity test
IEC 61000-4-12 Ring wave immunity test
IEC 60255-22-1
IEEE C37.90.1
Ontario Hydro
A-28M-82
Damped Oscillatory and Ring wave
IEC 61000-4-11 Voltage dips, short interruptions and
voltage variations immunity tests
IEC 61000-4-16 Test for immunity to conducted,
common mode disturbances in the
frequency range 0 Hz to 150 kHz
IEC 61000-4-17 Ripple on DC input power port
immunity test
IEC 61000-4-29+ Voltage dips, short interruptions and
voltage variations on DC input power
port immunity test
This standard only applies when using
high voltage DC as the source (100
VDC-300 VDC).
IEC 60255-11 Interruptions to and alternating
component (ripple) in DC auxiliary
energizing quantity of measuring
relays
IEC 61010-1 Safety requirements for electrical
equipment for measurement, control
and laboratory use - General
requirements
Safety Publications
IEC 60255-5 Insulation coordination for measuring
relays and protection equipment-
Requirements and tests
IEC 60068-2-1 Environmental Testing - Cold
IEC 60068-2-2
2
Environmental Testing - Dry Heat
IEC 60068-2-6
IEC 60255-21-1
Environmental Testing – Vibration
(sinusoidal)
IEC 60068-2-27 Environmental Testing - Shock
Environmental Standards
IEC 60068-2-29 Environmental Testing - Bump