Filter
Top Products
GE Energy
D400 Substation Data Manager User's Manual 11
1.2 Regulatory Compliance Information
CE Mark Compliance
The D400 is rated as CISPR 11 Group 1 Class “A” equipment.
Note: To provide higher EMC immunity and maintain CE Mark compliance, the serial
cables used for permanent RS-232 and RS-485 connections must comply with the
following requirements:
• Cables must be shielded
• D type connector covers must provide EMC shielding (e.g. metalized plastic or die cast
metal covers)
Warning
Class “A” equipment is intended for use in an industrial environment. The equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with these instructions, may cause interference to other devices in the
vicinity. If this equipment does cause interference with other devices, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving device
• Increase the separation between the equipment
• Connect the equipment into an outlet on a circuit different from that to which the
other device(s) is connected
• Consult the manufacturer or field service technician for help
Restriction of Hazardous Substances (RoHS)
The environmental protection use period (EPUP), as defined in SJ/T11363-2006, for
the D400 hardware assemblies listed in the table below is in excess of 20 years.
RoHS Material Declaration Data Content by Assembly
GE Part # Description Lead (Pb) Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers
(PBDE)
500-0340 D400 Substation Data Manager
Chassis Assy
X O O TBC TBC TBC
520-0190 D400 Power Supply Blank Assembly O O O O O O
520-0191 D400 Adapter Blank Assembly O O O O O O
520-0204 D400 650 MHz Celeron w Single
Ethernet
X O O O O O
520-0206 D400 USB KVM Assy X O O O O O
520-0207 D400 RS-232 IO Assy X O O O O O
520-0208 D400 RS-485 IO Assy X O O O O O