Filter
Top Products
GE Energy
D400 Substation Data Manager User's Manual 39
3.8 4-Port Twisted-Pair Ethernet Switch
The 4-Port Twisted-Pair Ethernet Switch (GE Part No. 520-0213) is a 10/100BaseT network
switch that plugs into the NET1 or NET2 slot (slots 11 and 12) on the D400. It provides
local area network connections for up to five Ethernet connections: four RJ-45
connectors on the rear panel and one RJ-45 connector on the front panel.
If two Ethernet switches are installed in the NET slots, the D400 may be used in a dual-IP
redundancy mode. That is, each switch can be configured with a different IP address to
provide a backup network connection if the primary channel fails.
See section “4.7 Network Connections” for typical cable connections.
Configuration Options
There are no selectable options on the 4-Port TP Ethernet card.
4-Port Twisted-Pair Ethernet Switch Card