2-4 Panel C Industrial Computer Hardware User's Manual – May 2003 GFK-2251
2
Configuring the Industrial Computer to Run on a Microsoft Network
Before configuring your Panel C computer for a network, you should consult your network
administrator. Duplicate TCP/IP addresses and duplicate computer names on the same
network can cause network problems.
1
. Click the Start Icon, then click Settings, and Control Panel.
2
. In the Control panel window, double click the Network icon. The Network dialog box
appears.
3. On the Identification tab, click Change. You will need to verify your Computer Name
(entered at machine startup) and Workgroup name.
Note: Computer names must be less than or equal to ten characters to run Panel
C software. Each computer on a network must have a unique name.