Filter
Top Products
2-6 Panel C Industrial Computer Hardware User's Manual – May 2003 GFK-2251
2
Note: The factory setting for the IP is 111.111.111.111 and for the Subnet is 255.0.0.0.
If necessary, consult your network engineer to select appropriate addresses.
5
. To add other protocols such as NetBEUI, on the Protocols tab of the Network dialog
box, click Add. A list of available protocols will appear. Choose the protocol you wish
to install and click OK. The system may ask where the Setup files are located. They
are in the C:\I386\ directory.