Filter
Top Products
1
6 Series 90 -70 I/O Link Interface Module User’s Manual – February 1993
GFK-0644A
Cable Types for the I/O Link
The following cables and connectors can be used to complete the I/O Link between
devices.
Item Catalog Number Vendor Description
Cable A03B–0807–K801 GE Fanuc 5 meter length with connectors on both ends.
Connects between master and slave device, or
between two slave devices.
Cable A03B–0807–K802 GE Fanuc 10 meter length with connectors on both ends.
Connects between master and slave device, or
between two slave devices.
Cable AMW 2076 OKI
Electric
Cable
10–pair shielded cable without connectors, for
making custom–length cable. Connects
between master and slave device, or between
two slave devices.
Connector A02B–0120–K301 GE Fanuc 20–pin connector with solder lug. Consists of
the two following parts.
Connector PCR–E20FS Honda 20–pin female connector with solder lug.
PRC–V20L Honda Connector cover.
Cable A03B–0807–K803 GE Fanuc 1 meter length with connectors on both ends.
Connects between master or slave and Optical
Adapter. This cable can only be used with an
Optical Adapter; do not use it for master/slave
or slave/slave connections.
Optical
Adapter
A138–154–B001 GE Fanuc Required for optical fiber cable.
Cable A66L–6001–009 GE Fanuc Optical fiber cable for use with Optical
Adapter.
” #L10R03
” #L15R03
” #L20R03
” #L30R03
” #L40R03
” #L50R03
” #L60R03
” #L80R03
” #L90R03
” #L100R03
10m
15m
20m
30m
40m
50m
60m
80m
90m
100m