Filter
Top Products
iii
GFK–0644A
Preface
Content of this Manual
This book is a reference to the features, operation, installation, and configuration of the
GE Fanuc Series 90 -70 I/O Link Interface Module (IC697BEM721).
Chapter 1. Introduction: Describes the functions and features of the Series 90-70 I/O
Link Interface Module.
Chapter 2. Installation: Includes basic setup procedures.
Chapter 3. Series 90-70 PLC Configuration: Shows how to add an I/O Link Interface
Module to the Series 90-70 PLC system.
Chapter 4. Series 90-70 PLC Programming: Explains how to configure, monitor, and
control the I/O Link Interface Module.
Related Publications
Logicmaster 90-70 Users’s Manual (GFK–0263). Reference manual for system operators
and others using the Logicmaster 90-70 software to program, configure, monitor, or
control a Series 90-70 PLC and/or a remote drop.
Power Mate Connection, Programming, Maintenance Manual (GFZ–61613). Reference
manual to setting up, programming, operating, and maintaining a Power Mate system.
Series Zero Connection Manuals. For 0 and 00-TC, TF, TTC, MC, MF, GCC, GSC, and PC
controls, the connection manual is GFK–61393. For 0-L and 00-L controls, the connection
manual is GFZ-61573.
Series Zero Operator Manuals. For 0 and 00-TC, TF, TTC, and GCC controls, the operator
manual is GFZ-61394. For 0 and 00-MC, MF, and GSC controls, the operator manual is
GFZ-61404. For 0-PC and 00-PC controls, the operator manual is GFZ-61594. For 0-L and
00-L controls, the operator manual is GFZ-61574.
Series 15 Connection Manual (GFZ-61213E).
Series 15 Operator/Programming Manual (GFZ-61213E).
Series 16 Connection Manual (GFZ-61874E).
Series 16 Operator Manuals. For the 16-MA control, the operator manual is GFZ-61874. For
16-TA and 16-TTA controls, the operator manual is GFZ-61804.
Series 16 Maintenance Manual (GFZ-61805).
We Welcome Your Comments and Suggestions
At GE Fanuc automation, we strive to produce quality technical documentation. After
you have used this manual, please take a few moments to complete and return the
Reader’s Comment Card located on the next page.
Jeanne Grimsby
senior technical writer