Filter
Top Products
8
FRONT PANEL DISPLAY
ROUTING
To route sources to a display:
Starting at the standby screen, press the SELECT button. The display selection
screen will now be displayed:
On this screen use the ◄ or ► buttons to select the desired display that will
have a source routed to it in the next step. Once selection is complete press the
SELECT button to confirm the selection. To cancel this operation at this time
press the CANCEL button.
Once the display has been selected and confi rmed, the source can then be
chosen which will be routed to the selected display. The following is the source
selection screen:
On this screen use the ◄ or ► buttons to select the desired display that will be
routed to the display selected in the previous step. Once selection is complete
press the SELECT button to confirm the selection. The selected source will now
be routed to the selected display. Once the routing is complete, the user will be
returned to the standby screen. To cancel this operation at this time press the
CANCEL button.