Filter
Top Products
19
RS-232 SERIAL CONTROL COMMANDS
#EDIDDSTOBA Function
The #EDIDDSTOBA function reads the downstream EDID and stores it to a
specifi ed EDID bank.
Syntax:
#EDIDDSTOBA param1 param2
Parameters:
param1 A downstream display [1 - 16]
param2 EDID bank offset [1 - 5]
#EDIDBATOLO Function
The #EDIDBATOLO function reads an EDID from an EDID bank and stores it to
any local input.
Syntax:
#EDIDBATOLO param1 param2 param3...param9
Parameters:
param1 EDID bank offset [1 - 5]
param2 Input list [0 - 16]
param3 - 9 (optional) Input list [1 - 16]
Notes:
By specifying zero as the second parameter, the EDID in the specifi ed bank is
copied to all sixteen inputs. If more than eight inputs need to be specifi ed in
order to receive the EDID in the specifi ed bank, the #EDIDBATOLO function must
be executed twice.
Example:
#EDIDBATOLO 5 2 3 4 5 6 7 8 9 10 11 12 not permitted!
Function must be run twice:
#EDIDBATOLO 5 2 3 4 5 6 7 8 9 max 8 inputs
#EDIDBATOLO 5 10 11 12 remaining inputs