Filter
Top Products
18
RS-232 SERIAL CONTROL COMMANDS
EDID Management
Function Description
#EDIDDSTOLO Read downstream EDID and stores into a Local EDID
#EDIDDSTOBA Read downstream EDID and stores in EDID Bank
#EDIDBATOLO Read downstream EDID and stores in any Local Input
#EDIDDETOLO Stores the default EDID in any input Local EDID
#LOEDIDTOLO Load EDID fi le using serial port to one of the local memories
#PRLOEDID Prints the Local EDID
#PRDSEDID Read downstream EDID and sends to serial port
#PRBAEDID Read EDID from bank and sends to serial port
#PREDIDST Print EDID from stored Local banks.
#LOCKEDID Secures the Local EDID
#EDIDDSTOLO Function
The #EDIDDSTOLO function reads the downstream EDID and stores it to a Local
EDID.
Syntax:
#EDIDDSTOLO param1 param2 param3...param9
Parameters:
param1 A downstream display [1 - 16]
param2 Input list [0 - 16]
param3 - 9 (optional) Input list [1 - 16]
Notes:
By specifying zero as the second parameter, the downstream EDID is stored
to all 16 DVI inputs. If more than eight inputs need to be specifi ed in order to
receive the downstream EDID, the #EDIDSDTOLO function must be executed
twice:
Example:
#EDIDDSTOLO 2 1 2 3 4 5 6 7 8 9 10 11 not permitted!
Instead, this function must be run twice:
#EDIDDSTOLO 2 1 2 3 4 5 6 7 8 max 8 inputs!
#EDIDDSTOLO 2 9 10 11 remaining inputs