Filter
Top Products
Loading originals to scan
Use these instructions to load originals into the device for scanning. For the best quality
scans, use the flatbed scanner. See
Selecting media for the automatic document feeder
(ADF) for information about choosing original documents for scanning.
Loading originals onto the flatbed scanner
1. Make sure that the automatic document feeder (ADF) is free of media.
2. Lift the flatbed scanner lid.
3. Place the original document face-down on the flatbed scanner with the top, left corner of
the document at the lower-right corner of the glass.
4. Gently close the lid.
5. The document is ready to be scanned.
CAUTION
To prevent damaging the device, do not allow the scanner lid to fall onto the flatbed scanner
surface. Always close the scanner lid when the device is not in use.
60 Chapter 5 Scanning ENWW