Filter
Top Products
Control panel message Description Recommended action
LOAD TRAY XX
[TYPE] [SIZE]
Recommend move tray switch to
STANDARD. Then close tray
alternates with
LOAD TRAY XX
[TYPE] [SIZE]
To use another tray press
Tray XX is either empty or configured for
a type and size other than specified in
the job. The size specified in the job is a
detectable size.
1. Load the paper tray with the
specified media.
2. Confirm that the media guides are in
the correct position.
3. Verify that the tray switch is in the
STANDARD position so the printer
will automatically detect the size.
Loading
program X
DO NOT POWER OFF
Programs and fonts can be stored on the
printer’s file system and are loaded into
RAM when the printer is turned on. The
number XX specifies a sequence
number indicating the current program
being loaded.
No action necessary. Do not turn the
printer off.
MANUALLY FEED
OUTPUT STACK
The even-numbered pages of a manual
two-sided document have been printed
and the printer is waiting for the output
stack to be inserted for the odd-
numbered pages to be printed.
Follow the instructions on the Print on
Both Sides instruction dialog box at the
computer.
OR
Press
for help at the printer.
Manually Feed
<TYPE> <SIZE>
For help press
A job was sent specifying MANUAL
FEED and Tray 1 is empty.
No other tray is available.
Load Tray 1 with the specified media.
Manually Feed
<TYPE> <SIZE>
For help press
alternates with
Manually Feed
<TYPE> <SIZE>
To continue press
A job was sent that specified Manually
Feed. Tray 1 is already loaded.
Load Tray 1 with the specified media.
OR
If the corrected paper is loaded in Tray
1, press
to print.
To use media from another tray, clear
the media from Tray 1, and then press
.
Moving solenoid
To exit press
STOP KEY
The printer is executing a Component
Test and the component selected is a
solenoid.
No action necessary.
NO STORED JOBS No jobs stored on the EIO disk. This
message is displayed when the user
enters the RETRIEVE JOB menu and
there are no jobs to retrieve.
No action necessary.
Control panel messages (continued)
ENWW Control panel messages 161