Filter
Top Products
Classifier-Based Software Configuration
Applying a Service Policy to an Interface
the information displayed with the show policy resources command, refer to
the “Monitoring Resources” appendix in the Management and Configuration
Guide.
In Figure 9-11, the show policy resources command output displays the number
of hardware resources (rules, meters, and application port ranges) used by
classifier-based QoS and mirroring policies that are currently applied to
interfaces on the switch, as well as other software features.
ProCurve# show policy resources
Resource usage in Policy Enforcement Engine
| Rules | Rules Used
Ports | Available | ACL
1-24 | 3014 | 15 |
25-48 | 3005 | 15 |
A | 3017 | 15 |
| Meters | Meters Used
Ports | Available | ACL
1-24 | 250 | |
25-48 | 251 | |
A | 253 | |
| Application |
1-24 | 3014 | 2 | 0 | 0 | | 0 | 0 |
25-48 | 3005 | 2 | 0 | 0 | | 0 | 0 |
A | 3017 | 2 | 0 | 0 | | 0 | 0 |
0 of 8 Policy Engine management resources used.
Key:
ACL = Access Control Lists
QoS = Device & Application Port Priority, QoS Policies, ICMP rate limits
IDM = Identity Driven Management
VT = Virus Throttling blocks
Mirror = Mirror Policies, Remote Intelligent Mirror endpoints
Other = Management VLAN, DHCP Snooping, ARP Protection, Jumbo IP-MTU.
Resource usage includes resources actually in use, or reserved for future
use by the listed feature. Internal dedicated-purpose resources, such as
port bandwidth limits or VLAN QoS priority, are not included.
| QoS | IDM | VT | Mirror | Other |
------+-------------+-------+-------+-------+-------+--------+-------|
11 | 0 | 1 | 0 | 3 |
10 | 10 | 1 | 0 | 3 |
8 | 0 | 1 | 0 | 3 |
| QoS | IDM | VT | Mirror | Other |
------+-------------+-------+-------+-------+-------+--------+-------|
5 | 0 | | | 0 |
4 | 0 | | | 0 |
2 | 0 | | | 0 |
| Port Ranges | Application Port Ranges Used
Ports | Available | ACL | QoS | IDM | VT | Mirror | Other |
------+-------------+-------+-------+-------+-------+--------+-------|
Includes hardware resources used by classifier-
based QoS and mirroring policies that are
currently applied to interfaces on the switch.
Figure 9-11. Displaying Policy Resources
9-32