Filter
Top Products
ENWW Clearing jams 119
6
Clearing jams from the output areas
Fuser jam, lower left door
Follow these directions to clear jams in the lower left door (fuser area).
1 If an optional output device is installed, move it away from the printer to gain
access to the left door. To do this, stand on the left side of the output device
and pull the device straight toward you.
2 Open the upper left door.
3 If the jammed media is visible, remove it from the printer. Then close the
upper right door and continue printing. If the jammed media is not visible, go
to step 4.
1
2
3