Filter
Top Products
ENWW What you can do to improve print quality 57
4
9 The media type is set to Plain by default. If you want to change this setting, use or to scroll to TRAY 1 TYPE,
and then press . Use or to scroll to the media type you want, and then press . For more information
about media types, see “Supported types of media” on page 86.
10 Press P
AUSE
/R
ESUME
to close the menus.
To set a custom media size and type for tray 2, tray 3, or tray 4
1 Open the tray.
2 Make sure that the paper guides rest against the stack of media in the tray.
3 Set the custom/standard switch to Custom.
Note
If the media size is not marked on the tray guide, it is a custom media size. If the media size is marked on
the tray guide see “To set a standard media size and type for tray 2, tray 3, or tray 4” on page 53.
4 Close the tray.
5 The message TRAY X SIZE = appears, with the ANY CUSTOM SIZE selected by default. Use or to scroll to the
CUSTOM setting, and then press .
6 The message UNIT OF MEASURE = appears, with the INCHES setting selected by default. If you want to change this
setting, use or to scroll to the MILLIMETERS setting, and then press .