Filter
Top Products
ENWW Installing supplies 195
7
22 If you do not have tray 4, you have three large rollers remaining; go to step
28. If you have tray 4, pull it out of the printer until it stops. Remove all of the
media from the tray.
23 Locate the blue switches (1) near the bottom and on the inside of both sides
of the tray. Slide the switches toward you. Hold the switches in this position
and pull the tray out of the printer.
Note
If you do not see the switch on the right side of the tray, make sure that you
have removed the stack of media.
24 Locate the three large rollers inside the opening.
22
23
24
1