Filter
Top Products
Technical Reference Guide 361834-002 C-7
Keyboard
C.2.4 Keys
All keys generate a Make code (when pressed) and a Break code (when released) with the
exception of the
Pause key (pos. 16), which produces a Make code only. All keys with the
exception of the
Pause and Easy Access keys are also typematic, although the typematic action
of the
Shift, Ctrl, Alt, Num Lock, Scroll Lock, Caps Lock, and Ins keys is suppressed by
the BIOS. Typematic keys, when held down longer than 500 ms, send the Make code repetitively
at a 10-12 Hz rate until the key is released. If more than one key is held down, the last key
pressed will be typematic.
C.2.4.1 Special Single-Keystroke Functions
The following keys provide the intended function in most applications and environments.
Caps Lock—The Caps Lock key (pos. 59), when pressed and released, invokes a BIOS routine
that turns on the caps lock LED and shifts into upper case key positions 40-49, 60-68, and 76-82.
When pressed and released again, these keys revert to the lower case state and the LED is turned
off. Use of the
Shift key will reverse which state these keys are in based on the Caps Lock key.
Num Lock—The Num Lock key (pos. 32), when pressed and released, invokes a BIOS routine
that turns on the num lock LED and shifts into upper case key positions 55-57, 72-74, 88-90,
100, and 101. When pressed and released again, these keys revert to the lower case state and the
LED is turned off.
The following keys provide special functions that require specific support by the application.
Print Scrn—The Print Scrn (pos. 14) key can, when pressed, generate an interrupt that initiates
a print routine. This function may be inhibited by the application.
Scroll Lock—The Scroll Lock key (pos. 15) when pressed and released, invokes a BIOS
routine that turns on the scroll lock LED and inhibits movement of the cursor. When pressed and
released again, the LED is turned off and the function is removed. This keystroke is always
serviced by the BIOS (as indicated by the LED) but may be inhibited or ignored by the
application.
Pause—The Pause (pos. 16) key, when pressed, can be used to cause the keyboard interrupt to
loop, i.e., wait for another key to be pressed. This can be used to momentarily suspend an
operation. The key that is pressed to resume operation is discarded. This function may be ignored
by the application.
The
Esc, Fn (function), Insert, Home, Page Up/Down, Delete, and End keys operate at the
discretion of the application software.
C.2.4.2 Multi-Keystroke Functions
Shift—The Shift key (pos. 75/86), when held down, produces a shift state (upper case) for keys
in positions 17-29, 30, 39-51, 60-70, and 76-85 as long as the
Caps Lock key (pos. 59) is
toggled off. If the
Caps Lock key is toggled on, then a held Shift key produces the lower
(normal) case for the identified pressed keys. The Shift key also reverses the
Num Lock state of
key positions 55-57, 72, 74, 88-90, 100, and 101.
Ctrl—The Ctrl keys (pos. 92/96) can be used in conjunction with keys in positions 1-13, 16,
17-34, 39-54, 60-71, and 76-84. The application determines the actual function. Both
Ctrl key
positions provide identical functionality. The pressed combination of
Ctrl and Break (pos. 16)
results in the generation of BIOS function INT 1Bh. This software interrupt provides a method of
exiting an application and generally halts execution of the current program.