Filter
Top Products
Table 2-4 Computer Setup—Boot (continued)
Option Description
F12 Boot from LAN
Prompt
Disables/enables the F12 Boot from LAN prompt message on the logo screen.
Hard Disk Boot Seq.
Allows you to specify the order of attached hard drive devices (such as USB HDD storage or USB
flash media). The first drive in the order has priority in the boot sequence and is recognized as
drive C (if any devices are attached).
Optical Drive Boot
Seq.
Allows you to specify the order in which attached optical drives (including USB ODD) are checked
for a bootable operating system image.
Network Boot Seq.
Allows you to specify the order in which network devices (including UP NIC cards) are checked for
a bootable operating system image.
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
Allows you to specify which devices will boot first, second, third, and fourth or to disable any of the
four:
●
Removable
●
CDROM
●
Hard Disk
●
Network
NOTE: MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system
has started.
Set Supervisor
Password
Allows you to establish a password to control access to Computer Setup.
BIOS Write
Protection
Disables/enables BIOS upgrading.
Computer Setup—Power
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-5 Computer Setup—Power
Option Description
After AC Power Loss
Allows you to select system power loss behavior:
●
Off
●
On
●
Last State
Wake on PCI Device
from S5
Disables/enables waking up from S5 by PCI device.
RTC Alarm Resume
Disables/enables RTC (real-time clock) alarm.
HP Pro 2110 – Computer Setup (F10) Utilities
9