Filter
Top Products
3.10 Paper Handling
3-84
3.10.5 Selecting the Paper Feed Source
You can select the paper source using the operator panel, from which the printer feeds paper as
the default. If an optional paper feeder(s) is installed, it is also available for the default paper
source.
1
Press the MENU key.
2
Press the U or V key repeatedly until
Paper Handling >
appears.
3
Press the Z key.
4
Press the U or V key repeatedly until >Feed Select appears.
5
To change the current paper feed source, press the ENTER key. A blinking question
mark (?) appears.
6
Press the U or V key to display the desired paper feed source. The message display
toggles through the following paper feed sources, depending on the installed optional
paper feeders (from the top most paper cassette to the bottom paper cassette):
MP tray
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Cassette 6
Cassettes 3 and 4 are available for selection when an optional paper feeder is installed.
Cassettes 5 and 6 are available for selection when two optional feeders are installed.
The FS-8000CD is equipped with the PD-30 duplex unit as a standard feature, whose
Casette 1 is occupied by the duplexer. Terefore, Cassette 1 is not available for the FS-
8000CD.
7
When the desired paper source displayed, press the ENTER key.
Paper Handling >
>Feed Select
Cassette 1
>Feed Select
? Cassette 1