Filter
Top Products
3.2 Using the Menu Selection System
3-8
3.2 Using the Menu Selection System
This section explains how to use the menu selection system. The MENU key on the operator
panel allows you to enter the menu when the printer is in ready state.
Note
The printer operates according to the most recent printer settings sent from the
application software, or from the printer driver, which take priority over the settings
made using the menu selection system.
3.2.1 Menu System Road Map
The overview of the printer’s menu system is diagrammed below and on the following pages.
For convenience, the printer can print out the simplified version of menu map. To print a menu
map, see Section 3.3.1 Printing a Menu Map on page 3-14.
The shaded items mean that these are available only when the corresponding optional device is
installed in the printer. For example, e-MPS and its submenus will not appear unless a hard
disk is installed in the printer.
Ready
PAR A4 PLAN
Print
Status Page
>List of VMB
>Quick Copy
>Private/Stored
>Print VMB Data
Print
Menu Map
>List of
Code JOB
>e-MPS >
Configuration
>>Quick Copy
>>Temp.Code JOB
Size
>>Perm.Code JOB
Size
>>VMB Size
Continued on the next page
e-MPS >
MENU Key