Filter
Top Products
vi
U.S. CDRH regulations
The Center of Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration implemented
regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured on and after
August 1, 1976. Compliance is mandatory for products marketed in the United States. A label indicating compliance
with the CDRH regulations must be attached to laser products marketed in the United States.
Ozone concentration
The printers generate ozone gas (O
3
) which may concentrate in the place of installation and cause an unpleasant smell.
To minimize the concentration of ozone gas to less than 0.1 ppm, we recommend you not to install the printer in a
confined area where ventilation is blocked.
To Prevent Printer from Tipping Over
To prevent the FS-8000C printer from tipping over, the optional CA-31B caster kit must be installed when the printer
is installed with more than one paper feeder or a duplex unit. For detailed information on the CA-31B caster kit, see
page A-11.