Filter
Top Products
3.13 Other Modes
3-111
3
Press the Z key.
4
Press the U or V key repeatedly until
>Resource Prot
. appears.
5
Press the ENTER key. A blinking question mark (?) appears.
6
Press the U or V key to select Permanent or Permanent/Temporary for resource
protection.
Permanent
Perm / Temp
7
When the desired resource protection is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
3.13.7 Alarm (Buzzer) Setting
You can set an alarm sound in addition to the message displayed when the paper supply is
exhausted, or when paper jamming occurs. This setting is useful, for example, when the printer
is located some distance from the user.
The audio alarm is set to On when leaving the factory. If the alarm is set to Off, it will not
sound.
1
Press the MENU key.
2
Press the U or V key repeatedly until Others > appears.
3
Press the Z key.
>Resouce Prot.
Off
>Resouce Prot.
? Off
Others >