Filter
Top Products
3.4 e-MPS
3-28
8
Press the U or V key to display the desired job title.
9
Press the ENTER key. If you entered an access code for the printer driver, the ID input
line appears. Enter the four-digit access code entered in the printer driver and press the
ENTER key. To enter the ID, press the Y or Z key to move the cursor to the number to
be changed and then enter the correct number by pressing the U or V key.
10
You can specify the number of copies to print. To increase the copy count, press the U
key; to decrease the V key.
11
Press the ENTER key to finalize the copy count. The printer prints the specified
number of copies for the job.
Deleting a Stored Job
1
Follow steps 1 through 8 in the above section.
2
When the title of the job to be printed is displayed (Agenda, in this example), press the
ENTER key. If you entered an access code for the printer driver, enter the four-digit
access code and press the ENTER key.
3
Press the V key repeatedly until Delete appears for the number of copies.
4
Press the ENTER key. The stored job is deleted from the hard disk.
>Agenda
Copies 001
>Agenda
?Copies 001
>Agenda
Copies 001
>Agenda
Delete