Filter
Top Products
1.2 Parts and Functions
1-7
1.2.2 Internal
Figure 1-3
1 Black Toner Container
This container holds black (K) toner. You must replace the container when the toner run
out.
2 Main Charger Unit
This is an electrical component used to transfer the toner onto the drum unit. The main
charger unit must be cleaned when you replace the toner container.
3 Yellow Toner Container
This container holds yellow (Y) toner. You must replace the container when the toner run
out.
4 Magenta Toner Container
This container holds magenta (M) toner. You must replace the container when the toner
run out.
5 Cyan Toner Container
This container holds cyan (C) toner. You must replace the container when the toner run
out.
6Power Cord Connector
This connector accepts the power cord supplied with the printer.
Caution
The power cord must not be unplugged from power at least 30 minutes since the printer is
switched off.
7 Waste Toner Bottle
This plastic bottle collects waste toner for later disposal. The bottle has a cap which is
used to seal the bottle opening when being disposed of.