Filter
Top Products
6.5 Cleaning the Printer
6-18
4
Clean the rubber belts using the cleaning cloth.
Note
Be careful not to touch the black, sponge roller (secondary transfer roller) during
cleaning as this may adversely affect print quality.
Figure 6-25
5
Grasping the tab of the separation charger cleaning knob, gently pull the cleaning
knob out and push it back in. Repeat this 5 to 7 times. This cleans the separation
charger wires inside.
Figure 6-26
Rubber Belts
SecondaryTransfer Roller
Cleaning knob (Green)