Filter
Top Products
5.3 Error Messages
5-9
Load Cassette #
(paper size)/(paper type)
††
The paper cassette matching the paper size and paper type of the print job
is empty. Load paper into the paper cassette. The option paper feeder cas-
settes are indicated by #. Press the GO key to resume printing.
Or, if you want to print from a different paper source, press the V or U key
to display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key,
Paper Handling > appears. By pressing the U key, the paper type set-
tings menu appears. After setting the correct paper type, press the ENTER
key and printing starts.
If you want to print from a different paper source, see Chapter 3 Using the
Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
3-84.
Load MP Tray
(paper size)/(paper type)
††
There is no paper cassette installed in the printer that matches the paper
size and paper type of the print job. Set paper in the MP tray. Press the GO
key to resume printing. (Note that feeding the paper having a paper size
which does not match the current paper size from the MP tray can cause
paper jam.)
Or, if you want to print from a different paper source, press the V or U key
to display Use alternative and you can change the source for paper
feeding. After selecting a paper source and pressing the MENU key,
Paper Handling > appears. By pressing the U key, the paper type set-
tings menu appears. After setting the correct paper type, press the ENTER
key and printing starts.
If you want to print from a different paper source, see Chapter 3 Using the
Operator Panel, section 3.10.5 Selecting the Paper Feed Source on page
3-84.
Memory card err
Insert again
The memory card is accidentally removed from the printer’s memory card
slot during reading. If you continue reading the memory card, insert the
same memory card into the slot again. The printer again reads it from the
beginning of the data.
Also see Insert the same memory card.
Memory overflow
Press GO
The total amount of data received by the printer exceeds the printer’s inter-
nal memory. Try adding more memory. Press the GO key to resume print-
ing. You can abandon printing by the CANCEL key.
If Auto Continue is set to On, printing will be automatically resumed after
a preset period of time.
MemoryCard err##
Press GO
A memory card error has occurred. Look at the error code given in place of
## and refer to Section 5.3.2 Storage Error Codes on page 5-11. To ignore
the memory card error, press the GO key
Missing
duplex drawer
The duplex unit is not installed. Install the duplex unit.
Missing
stapler unit
The stapler unit is not installed in the optional document finisher. Install
the stapler unit in the document finisher.
Missing toner
TK-82 #######
Install the toner container using a toner kit for the particular color. The
printer does not operate when this message is displayed.
Option interface
error ##
A failure has occuerred with the option network interface card. Check the
option network interface card installed in the printer.
Option stacker
cover open
The cover of the optional finishers (bulk stacker, document finisher, or
sorter) is open. Close the cover.
Option stacker
paper full
The optional bulk stacker (ST-30) tray is full. Remove paper sheets.
Message Corrective Action
Table 5-3 (Continued)