Filter
Top Products
3.13 Other Modes
3-108
5
To change the timeout time, press the ENTER key. A blinking cursor (
_
) appears.
6
Press the U or V key to increase or decrease the value at the blinking cursor and set
the desired time. The timer can be set between 5 and 240 min, in 5-minute increments.
Use the Z and Y keys to move the cursor right and left.
7
When the desired timeout time is displayed, press the ENTER key.
8
To exit the menu selection, press the MENU key.
3.13.4 Received Data Dump
You can print data received by the printer as hexadecimal code for debugging programs and
files.
1
Press the MENU key.
2
Press the U or V key repeatedly until Others > appears.
3
Press the Z key.
4
Press the U or V key repeatedly until > Print HEX-DUMP appears.
5
Press the ENTER key. A question mark (?) appears.
>Sleep Timer >
030
min.
Others >
>Print HEX-DUMP
>Print HEX-DUMP?