Filter
Top Products
3.11 Color Control
3-97
3.11 Color Control
This section covers how to use the operator panel for controlling parameters pertaining to
color printing.
3.11.1 Selecting Monochrome or Color Printing
You can use the Color Mode menu on the operator panel to select the Monochrome or Color
printing mode. It also allows you to perform adjustments on color. The Color Mode menu has
the following sub-menus:
• RGB simulation
Prints using colors close to those projected on a monitor.
• Ink simulation
Used for setting the type of colors to be used, such as SWOP. Ink simulation can be used
only when KPDL and KPDL(AUTO) is chosen as the emulation.
• Color calibration
Executes manually the color calibration System for the optional color reproduction
performance.
Selecting Monochrome or Color Printing
By default, the printer is set to print in color mode. To change it to monochrome mode,
proceed as follows:
1
Press the the MENU key.
2
Press the U or V key repeatedly until Color Mode appears. The current color mode
appear under Color Mode.
3
To change color mode, press the ENTER key. A blinking question mark (?) appears.
4
Press the U or V key to change color mode — Monochrome or Color.
Color Mode >
Color
Color Mode
? Color