![](http://pdfasset.owneriq.net/a/12/a120cf94-72dc-4e97-ad4d-1b7408803b34/a120cf94-72dc-4e97-ad4d-1b7408803b34-bg89.png)
ENWW Appendix D Working with memory and print server cards 135
Installing memory and font DIMMs
You can install more memory for the printer, and you can also install a
font DIMM to allow the printer to print characters for languages such as
Chinese or the Cyrillic alphabet.
CAUTION
Static electricity can damage DIMMs. When handling DIMMs, either
wear an antistatic wrist strap, or frequently touch the surface of the
DIMM antistatic package and then touch bare metal on the printer.
To install memory and font DIMMs
1 Print a Configuration page by pressing (G
O) and
(C
ANCEL JOB) simultaneously. (A Supplies Status page and
possibly an HP Jetdirect Configuration page also print.) If the
Configuration page does not print in your language, see “Special
pages” on page 56.
2 After the Configuration page prints, turn the printer off and
disconnect the power cable.
3 On the right side of the printer, open the DIMM door.
4 Open the second DIMM door.
5 Release the locks on each side of the DIMM slot.
6 Remove the DIMM from the antistatic package.
2
6
3
5
4