Filter
Top Products
To change the language, you must change your Web browser's language setting. For example, in
Internet Explorer version 6, go to the Tools menu and select Internet Options, Languages. Then
ensure that the language you want is at the top of the list in the dialog box.
To complete the change, you must close and reopen your Web browser.
Change the sleep mode setting
If the printer is left switched on but unused for a certain period of time, it goes automatically into sleep
mode to save power. The default is 30 minutes. To change the time the printer waits before it goes into
sleep mode, press the Menu key to return to the main menu and select the Setup menu icon
,
then Front panel options > Sleep mode wait time. Highlight the wait time you want and then press
the OK key. You can set the time to 30, 60, 120, 150, 180, 210, or 240 minutes.
Turn the buzzer on and off
To turn the printer's buzzer on or off, press the Menu key to return to the main menu and select the
Setup menu icon
, then Front panel options > Enable buzzer, and highlight on or off and press
the OK key. By default, the buzzer is set to on.
Change the front-panel display contrast
To change the contrast of the front-panel display, select the Setup menu icon , then Front panel
options > Select display contrast, and enter a value using the Up or Down key. Press the OK key to
set the value. The default contrast is set to 50.
Change the units of measurement
To change the units of measurement in the front-panel display, select the Setup menu icon ,
then Front panel options > Select units, and select English or Metric. By default the units are set to
metric.
Configure network settings
To configure the network settings from HP Easy Printer Care (Windows), select Settings tab > Network
Settings. From HP Printer Utility (Mac OS), select Configuration > Network Settings. You can view
and configure the following network settings.
●
IP Configuration method: specify the way to set an IP address between BOOTP, DHCP, Auto
IP, and Manual
●
Host name: specify an IP name for the network device, the name may contain up to 32 ASCII
characters
●
IP address: specify the IP address on the print server, duplicate IP addresses on a TCP/IP network
are not allowed
NOTE: If you change the current IP address and click Apply, the browser loses the current
connection to the print server because it is pointing to the old address. To reconnect, browse
to the new IP address.
ENWW Change the sleep mode setting 31
Personal settings