Filter
Top Products
Chapter 5 153
Defining Connectivity Components
Defining Ports, DLCs, and Connection Networks
NOTE The underlying stack is also configured with an address and accepts only
calls that specify an address starting with the configured address. Any
address configured on the port must start with the address configured on
the stack; otherwise, calls accepted by the stack are subsequently
rejected by the port.
Additional Port Parameters for Implicit PU
Concentration
Maximum active template instances
Specify the maximum number of link station instances
to be generated from the template.
Configure downstream LUs for implicit PU access
Whether to configure downstream LUs that use this
PU (see “Configuring PU Concentration”).
Additional Configuration
After performing the port configuration, continue with the following
configuration tasks:
• To define a link station on a port you have configured, see “Defining
Link Stations”.
• To define a DLUR PU, see “Defining DLUR PUs”.
• To support APPC communication, see Chapter 7, “Configuring APPC
Communication.”