Filter
Top Products
210 Chapter 8
Configuring User Applications
Overview
Overview
This chapter provides instructions for configuring SNA resources to
support user applications that use any of the following communication:
3270, RJE, 5250, and LUA. The SNA resources required by such
applications include LUs, session definitions, and user definitions. For
3270, RJE, LUA, and dependent APPC communication, you must
configure dependent LUs. For independent APPC and 5250
communication, you can use the default control point LU (defined
automatically when you configure the local node) or define independent
LUs.Before you can configure the resources described in this chapter, you
must perform the following configuration:
• Configure the node as described in “Configuring the Node”.
• Configure connectivity as described in Chapter 5, “Defining
Connectivity Components.” For 3270, RJE, LUA, and dependent
APPC communication, you must configure the link to support
dependent LU traffic. For independent APPC and 5250
communication, the link must support independent LU traffic.
You do not need to configure a direct link to the host if you are using
upstream PU Concentration or DLUR. For more information, see
“Defining DLUR PUs”.
The following list describes the configuration tasks required for each
type of user application:
3270 applications
For 3270 communication, configure the following
resources: