Filter
Top Products
Appendix C 351
Configuring an Invokable TP Using snaptpinstall
File Format for snaptpinstall
The application is displayed at its normal size and
position.
NOACTIVATE
The application is displayed at its normal size and
position, and the focus remains on the previously active
window. This application's window does not become the
active window.
MINNOACTIVATE
The application is minimized, and the focus remains on
the previously active window.
This parameter is optional. If it is not included, the
default is NORMAL.
SECURITY_TYPE
This parameter applies only to Win32 clients.
Specify the security type of the TP executable:
APPLICATION
The TP executable is started as an application using
the CreateProcess system call.
SERVICE
The TP executable is started as a service using the
StartService system call. In this case, the service
must have been previously installed with the Service
Control Manager using the name specified by the
SERVICE_NAME parameter.
SERVICE_NAME
This parameter applies only to Win32 clients.
The name of the service installed with the Service
Control Manager. This parameter is only used if the
SECURITY_TYPE is SERVICE.
End of Section
Note the following points about the format of these entries:
• You can include a comment line by including # as the first character
of the line; SNAplus2 then ignores this line. SNAplus2 also ignores
completely blank lines.
• Each parameter = value entry must be on one line; it cannot contain
line-break characters. The maximum length of a line is 255
characters; additional characters are ignored.