Filter
Top Products
Chapter 11 281
Managing SNAplus2 Clients
Managing Win16 Clients
The group_name argument indicates the group name of
the SNAplus2 user on this client. This name must
match the SNAplus2 configuration on servers, as
follows:
• If the client will be running 3270 or 5250 emulation,
and you have set up the SNAplus2 configuration to
include emulator records for groups of users rather
than an individual record for each user, this name
must match the name of an emulator user record
that is defined for use by a group of users. Emulator
user records are defined using the
define_emulator_user command; for more
information, see “Configuring 3270 Emulator
Users” or “Configuring 5250 Emulator Users”.
• If you have not set up emulator user records for
groups of users, this line of the file is optional. If
neither the user name nor the group name is
specified, 3270 or 5250 users on the client can use
the <DEFAULT> user record, if any, in the domain
configuration file.
• If the client will not be running 3270 or 5250
emulation, this line of the file is not required.
invoked_tps
Specify one of the following values:
YES
This client is used to run invoked TPs (APPC TPs that
issue RECEIVE_ALLOCATE, or CPI-C applications
that issue Accept_Conversation or Accept_Incoming).
In this case, you may also need to define the TP on this
client. For more information, see “Defining TPs” or
Appendix C, “Configuring an Invokable TP Using
snaptpinstall.”.
NO
This client is not used to run invoked TPs.
This line is optional. If it is not specified, the default is
NO.
lan_access_timeout