Filter
Top Products
206 Chapter 7
Configuring APPC Communication
Configuring APPC Security
The password to be accepted in an incoming
conversation from a remote node. The password can be
up to 10 characters long. This password is not related
to HP-UX login passwords on either the local or the
remote node.
Additional Configuration
After configuring conversation security, you can configure 5250
communication as described in Chapter 8, “Configuring User
Applications.”
Configuring a Security Access List
You can define an APPC security access list to control access to an LU or
TP (or both). This list can be referred to by the definition for an APPC
local LU or TP.
To configure a security access list, use one of the following methods:
Motif administration program
Select APPC, Security, and Conversation-level
security from the Services menu on the Node
window, then select the Security Access Lists pane and
choose New.
Command-line administration program
Issue the following command:
define_security_access_list
Security Access List Configuration Parameters
The following parameters are required for security access list
configuration:
Name
Name of the security access list. The definition for an
APPC TP or local LU can use this name to refer to the
access list.
Users in access list
The names of users included in the security access list.