Filter
Top Products
Chapter 11 289
Managing SNAplus2 Clients
Managing Win16 Clients
This parameter is optional. If it is not specified, the
default is 100000 (bytes).
truncation_length
The maximum length, in bytes, of the information
written to the trace file for each message. If a message
is longer than this, SNAplus2 writes only the start of
the message to the trace file, and discards the data
beyond truncation_length. This enables you to record
the most important information for each message but
avoid filling up the file with long messages.
This parameter is optional. If it is not specified,
SNAplus2 does not truncate messages (all the data
from each message is written to the file).
all_api
To trace messages for all APIs, set this parameter to
YES. In this case, SNAplus2 ignores the parameters
from appc through nof.
To disable tracing for all APIs, set all_api and all of the
parameters from appc through nof to NO.
To trace only messages for specific APIs, set all_api to
NO, and use the parameters from appc through nof to
indicate which APIs to trace.
This parameter is optional. If it is not specified, the
default is NO.
appc
To trace APPC API messages, set this parameter to
YES; otherwise, set it to NO.
This parameter is optional. If it is not specified, the
default is NO. If the all_api parameter is set to YES,
this parameter is ignored, and APPC messages are
traced.
cpic
To trace CPI-C API messages, set this parameter to
YES; otherwise, set it to NO.
This parameter is optional. If it is not specified, the
default is NO. If the all_api parameter is set to YES,
this parameter is ignored, and CPI-C messages are
traced.
csv