Filter
Top Products
202 Chapter 7
Configuring APPC Communication
Defining CPI-C Side Information
Same
The partner TP uses security, but accepts verification
by the local TP of the user ID and password provided
by the initiating TP. If you choose a security level of
Same, you also need to specify a valid user ID that is
accepted by the partner TP.
Program
The partner TP requires a User ID and password. If
you choose a security level of Program, you need to
specify a valid user ID and password that are accepted
by the partner TP.
Program strong
The partner TP requires a user ID and password. Both
the local and remote nodes must support security
enhancements so that the password is encrypted.
Refer to the documentation for the CPI-C application or
consult the application programmer to find out what
security parameters to use.
User ID
If you have chosen a security level of Same, Program,
or Program strong, specify a user ID to be sent on
the initiating message to the remote application. This
value must match a user ID that the application is
defined to accept.
This user ID is not related to HP-UX login user IDs on
either the local or the remote node. If the remote node
is running SNAplus2, the user ID must be configured
on the remote node using the Conversation Security
Configuration dialog.
Password
If the security level is specified as Program or Program
strong, specify a password to be sent when the
conversation is allocated. This value must match the
password defined at the remote application for use with
the supplied user name.
This password is not related to HP-UX login passwords
on either the local or the remote node.
If the remote node is running SNAplus2, the password
must be configured on the remote node using the
Conversation Security Configuration dialog.