Filter
Top Products
220 Chapter 8
Configuring User Applications
Configuring RJE Workstations
Configuring RJE Workstations
You can define an RJE workstation to submit jobs to a host computer for
processing. The RJE workstation also handles the output returned by
the host.
NOTE You must configure at least one RJE LU before defining an RJE
workstation.
To configure an RJE workstation, use one of the following methods:
Motif administration program
Select RJE Workstations on the Windows menu on
the Node window.
Command-line administration program
Issue the following command:
define_rje_wkstn
RJE Workstation Configuration Parameters
The following parameters are required for RJE workstation
configuration:
Workstation name
A name by which users can identify the RJE
workstation (for example, when they start the
workstation or submit jobs). The workstation name
must be 1–4 characters long.
You may find it helpful to use the workstation name
that is defined on the host computer, but it is not
necessary to do this.
Run on computer
The name of the HP-UX system on which the RJE
workstation runs. If you do not supply this value, the
workstation can run on any computer.
UNIX user name
The HP-UX system user name of the primary user of
the RJE workstation. The user must be a valid user of
the HP-UX system on which the RJE workstation runs.