Filter
Top Products
41
How to print a stack of envelopes
1 In the HP print settings box, click the Setup tab, and then
select the envelope you’re printing on as the Paper Size.
(See “Finding the HP print settings box” on page 26.)
2 Slide both paper adjusters out.
Make sure the IN tray is empty.
3 Load a stack of up to 20 envelopes in the printer, as shown
here. (If you’re using thick envelopes, you might need to
reduce the quantity.)
Make sure the edges of the envelopes align with the right
side of the IN tray.
4 Slide the paper adjusters so that they fit snugly against the
edges of the envelopes.
5 Print the envelopes.
OUT tray
IN tray
Note: When printing a stack of JIS #4 (90 x 205 mm)
envelopes, follow instructions on page 42 for printing
cards.
Flap side up and flap
to the right
Note: When printing JIS #3 envelopes (120 x 235 mm),
make sure the flap is up and toward you.