Filter
Top Products
Command Settings
Name of Function
Reference
Page
Command
Page 33
This specifies the commands and conditions that are trans-
ferred from the computer. The following commands are sup-
ported:
• RTL-PASS:
• MH-GL, GL2 (MH-RTL): Mutoh MH-GL/MH-GL/2 (MH-RTL)
commands (conform to Hewlett-
Packard HP-GL, HP-GL/2 (HP-RTL)
commands)
• MH-GL2 (MH-RTL): Mutoh MH-GL/2 (MH-RTL) commands
(conform to Hewlett-Packard HP-GL/2
(HP-RTL) commands)
(MH-GL, GL2 printing unit is 0.025 mm)
Plot Area
Page 34
This specifies environmental functions for the printer. It speci-
fies the printing area (hardclip area) for the media size.
• Normal: Specifies the standard printing area for RJ-6000
Series printers
Distance from edges of media:
Cut sheet - Front 25 mm, Back 20 mm, Sides 10 mm
Roll media - Front 25 mm, Back 20 mm, Sides 10 mm
• Expanded: Specifies a printing range for the RJ-6000 printer
that is interchangeable with Mutoh XP Series pen
plotters.
However, since the maximum printing range is 1351.6 mm for
a 54-inch printer and 1554.8 mm for a 62-inch printer, if
expanded mode is specified with media wider than 1361.6
mm for a 54-inch printer, or 1564.8 mm for a 62-inch printer,
the left and right margin shown below will be differed.
Distance from edges of media:
Cut sheet - Front 25 mm, Back 20 mm, Sides 5 mm
Roll media - Front 25 mm, Back 20 mm, Sides 5 mm
(media width 54 inch: 1361.6 mm or less, 62 inch: 1564.8 mm
or less)
Understanding the Functions
22
RJ-6000 Series USER GUIDE Functions Edition