Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Utility" menu by pressing
the [Menu Up] key or [Menu Down]
key.
Step 3
Press the [ENTER] key to confirm the
"Utility" menu and shift to the next
level.
Step 4
Bring up the "Initial" item by pressing
the [Menu Up] key or [Menu Down]
key.
Step 5
Press the [VALUE +] or [VALUE -] key
to specify "Yes".
Step 6
Press the [ENTER] key to confirm
"Initial" and shift to "Initial All".
Step 7
Bring up the "Initial Functi." item by
pressing the [Menu Up] key or [Menu
Down] key.
Step 8
Press the [VALUE +] or [VALUE -] key
to specify "OK".
Step 9
Press the [ENTER] key to confirm
"Initial Function" and shift to the next
item to be set.
Utility Settings: Initial: Function
64
RJ-6000 Series USER GUIDE Functions Edition
Plot OK
*Menu* Command>
*Menu* Ut i l i t y>
ErrorDi spl ay:Of f
Initial: No
Initial: Yes>
Initial All : No
InitialFuncti.No
InitialFuncti.OK