Filter
Top Products
Media replacement request
Media is loaded but the next process
has failed. The lever was raised during
printing or cutting and lowered again
without the media having been
removed. Remove the media.
Roll media end
The end of the media was detected
when roll media was initialized.
Replace the roll media.
(See Basic Edition page 41)
No waste box
The waste box is not installed. Install a
waste box containing a waste liquid
absorbent sheet.
(See Basic Edition page 84)
Check waste box
The waste box is becoming full. Obtain
a waste box from supplies and have it
ready for replacement.
(See Basic Edition page 84)
Waste box full
The waste box is full of waste liquid.
Take out the waste box and replace
the waste liquid absorbent sheet.
Install a waste box that contains a
waste liquid absorbent sheet.
(See Basic Edition page 84)
Request to insert ink cartridges of the same type
The type of ink cartridges was
changed (from dye to pigment or from
pigment to dye) during cleaning or ink
filling. Replace with original cartridge
type.
(See Basic Edition page 80)
89
RJ-6000 Series USER GUIDE Functions Edition
Messaged Errors and Countermeasures
Details of the Display
Remove Med i a
End o f Ro l l
No Waste-InkTank
Check Waste Ink
Ful lWaste InkTank
Ink Change