Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Utility" menu by pressing
the [Menu Up] key or [Menu Down]
key.
Step 3
Press the [ENTER] key to confirm the
"Utility" menu and shift to the next
level.
Step 4
Bring up the "Error Display" item by
pressing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to switch to "Off" or "On".
Step 6
Press the [ENTER] key to confirm
"Error display" and shift to the next
item to be set.
Step 7
If no other items are to be changed,
press the [Back] key.
Step 8
Do not press any other keys for 3 min-
utes or press [Back] key again.
Step 9
The permanent display is restored.
Utility Settings: Error Display
59
RJ-6000 Series USER GUIDE Functions Edition
How to Set Parameters
Plot OK
*Menu* Command>
*Menu* Ut i l i t y>
ErrorDi spl ay:Of f
ErrorDi spl ay:Of f
ErrorDisplay: On
Initial: No
*Menu* Ut i l i t y>
Plot OK