Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Network" menu by press-
ing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Network" menu and shift to the next
level.
Step 4
Press the [VALUE +] or [VALUE -] key
to set the first part of the IP address to
a number between "001" and "255".
(The first part identifies the country
and 192 is usually used in a LAN envi-
ronment.
Step 5
Press the [ENTER] key to confirm the
first address and shift to the second
address.
Step 6
Press the [VALUE +] or [VALUE -] key
to set the second part of the IP
address to a number between "001"
and "255".
Step 7
Press the [ENTER] key to confirm the
second address and shift to the third
address.
Network Setting: IP Address
57
RJ-6000 Series USER GUIDE Functions Edition
How to Set Parameters
Plot OK
*Menu* Command>
*Menu* Network>
->192.034 .043.015
->192.034 .043.015
192->034. 043.015
192->168. 043.015