Filter
Top Products
Step 1
If a menu is to be specified, press the
[MENU] key.
Step 2
The key contents change to the purple
section on the outside of the control
panel.
Bring up the "Function" menu by
pressing the [Menu Up] key or [Menu
Down] key.
Step 3
Press the [ENTER] key to confirm the
"Function" menu and shift to the next
level.
Step 4
Bring up the "Ink Dry Time" item by
pressing the [Menu Up] key or [Menu
Down] key.
Step 5
Press the [VALUE +] or [VALUE -] key
to select "0s", "5s", "10s", "20s", "30s",
"40s", "50s", "60s", "90s", "120s",
"150s", "180s", "210s", "240s", "270s"
or "300s", "6M", "7M", "8M", "9M",
"10M", "15M", "20M", "25M", "30M",
"35M", "40M", "45M", "50M", "55M", or
"60M"
Step 6
Press the [ENTER] key to confirm "Ink
Dry Time" and shift to the next item to
be set.
Step 7
If no other items are to be changed,
press the [Back] key.
Function Settings: Ink Dry Time
41
RJ-6000 Series USER GUIDE Functions Edition
How to Set Parameters
Plot OK
*Menu* Command>
*Menu* Funct i on>
InkDryTime: 30s
InkDryTime: 30s
InkDryTime: 60s
Ha l f tone: Speed