Filter
Top Products
Command errors occur during the processing of command data received from
the computer.
If the printer's command set-up differs from the type of command data
sent from the computer
If there is a grammatical error in the command data sent from the com-
puter
The beeper gives three long beeps when a data error occurs.
• A command error may occur together with a data error (related
to error code I15). In this case the communication settings
should be checked.
• The command that caused the error may be shown enclosed in
brackets in the data error message.
Undefined command error
A command that is undefined by MH-
GL command mode was analyzed.
(See pages 22, 33)
Parameter error
An invalid number of parameters follow
the command.
(See pages 22, 33)
Numerical value error
An invalid parameter follows the com-
mand.
(See pages 22, 33)
Undefined character set
A non-existent character set has been
selected.
(See pages 22, 33)
Command Error Display and Countermeasures
92
RJ-6000 Series USER GUIDE Functions Edition
NOTE
MH0 1 E r r o r [ ]
MH0 2 E r r o r [ ]
MH0 3 E r r o r [ ]
MH0 4 E r r o r [ ]